How to Take Full Back-UP of Coolpad Cool 1 Dual

A Step By Step Guide to have a Complete Backup of Coolpad Cool 1 Dual. Just in case something goes wrong.

There are all sorts of “backups” that help get you out of various situations. Think of the spare tire in your trunk or the extra pieces of webbing in a climbing anchor. If you’ve ever been rock climbing, you know that it’s essential to build redundancies into your anchors, that way if one part fails, you’ve got another part as a backup.

There are various reasons for having backups. In climbing, a backup can save your life, but with data, a backup can save your business.

Why you should backup

Data loss can happen in many ways, the most common causes are physical failure of your PC, accidental error, theft or disasters like fire, flood and dropped coffee mugs! It is also common for data to be saved to just one place, like ‘My Documents’ on your PC’s hard drive. Which means that if this data were to be accidentally changed or deleted it would take considerable time and expense to restore it.

Having a backup of you’re data will save you’re life. which rooting you’re phone.

Follow the Steps below to Backup Coolpad cool dual 1. This might also help you unbrick you’re phone someday.

Tools Required

  • QPST 2.7.437
  • .Net above 4.0 should be Installed on the system.
  • Qualcomm USB Driver
  • Vcredist_x86
  • A Small Script based on Redmi Device but works with coolpad cool 1 dual too.

The installation guide for the tools are already covered here. 

Once you’re done with the Installation of tools. Download the Script [sociallocker]Here[/sociallocker]

Step 1 : Download the script from the above link. The link contains Backup_Cool1.zip

Step 2 : Unzip the File in C: Drive only using you’re favorite compression tools.

After Extracting you will find the Folder “_Backup_cool1” in the C Drive. Why does the Hard Drive starts from Letter C?.

Step 3 : Navigate to C: –> _Backup_cool1 –> Open params.bat file with notepad. Don’t run the .bat batch file. Open for the edit. we will have to change the SaharaComPort no. Leave it open

Step 4 : Open Command Prompt as Administrator and type the following.

bcdedit.exe -set TESTSINGNING OFF

This allows non Signature and third party Drivers to Install on the Windows.

Step 5 : Switch Off the device. Enable USB debugging and Unlock OEM Bootloader in Developer options. Connect the device using USB to the PC.

  • Hold Volume up , Volume Down and Power Button At same time.
  • Hold this three buttons untill the Red notification light blinks atleast 3 times.

Step 6: Navigate to C: windows –> Program files (x86) –> Qualcomm–> QPST –>bin–>QFIL.exe.

As the Application detects COM7. The port number will be different copy that Value and replace it with COM9 in C:_Backup_Cool1\params.bat file. and save it.

Step 7 :  Double Click on “ReadSeLParts.bat” and run the batch file. The Backup Process takes place if you had given the COM Port number properly. Sit back the backup process starts and the Files will be stored in the Dump Folder

The backup process takes less then 2 minutes.

Ahaa, Now you have the Backup of you’re device so that you can’t Waste you’re time giving the device to Customer service centers. Just in case if something goes wrong.

The Dump Folder contains. all the backup of you’re device.

List of partitions

rpmbak
tz
tzbak
hyp
hypbak
dsp
modemst1
modemst2
OEMCONFIG
oeminfo
DDR
fsg
sec
splash
aboot
abootbak
boot
recovery
devinfo
persist
misc
factory
bootconfig
rootconfig
recoveryconfig
letvconfig
letveui
letvsecure
letvreserve
kernellog
params
panic
keystore
config
oem
limits
mota
devcfg
dip
mdtp
syscfg
mcfg
cmnlib
keymaster
cmnlibbak
keymasterbak
apdp
msadp
dpo

Let me know if you want me to write the tutorial to “Restore the data” in the comments section below.

Updated 

TO RESTORE THE DEVICE. 
Step 1:  Switch off the Device. Connect to the PC using USB, Hold Volume +,Volume – and the Power buttons. Hold this three buttons untill the Red notification light blinks.
Step 2 : Run “GetPartTable.bat” batch file. to create a list of Partitions available from phone known as Partable.txt
Step 3 : Run “MakeRawProg.cmd” to Automatically create a flashing script based on you’re device backup data.
Step 4 : once the flashing script is created you will see.
  • prog_emmc_firehose_652.mbn
  • selparts.txt
  • parttable.txt
  • rawprogram0.xml

In the same folder. Now use QPST Program to flash it, The same was as you flashed the Recovery.

Missed out any steps? Comment below we are happy to help you.
Disclaminer : I or The pantomath Team are not RESPONSIBLE FOR ANY DAMANGED CAUSED TO YOU’RE WHILE FOLLOWING THIS POST.

1 COMMENT

  1. Superb blog! Do you have any helpful hints for aspiring writers? I’m hoping to start my own website soon but I’m a little lost on everything. Would you recommend starting with a free platform like WordPress or go for a paid option? There are so many choices out there that I’m totally confused .. Any recommendations? Thanks!

Leave a Reply