How to Root LeEco Coolpad Cool 1 Dual – C103 -C106 TWRP

LeEco Coolpad Cool 1 Dual C103 C106 TWRP Rooting Guide

Coolpad Cool 1 Dual The phone comes with a 5.50-inch touchscreen display with a resolution of 1080 pixels by 1920 pixels. Coolpad Cool 1 Dual price in India starts from Rs. 13,999.

The Coolpad Cool 1 Dual is powered by 1.8GHz octa-core Qualcomm Snapdragon 650 processor and it comes with 4GB of RAM. The phone packs 32GB of internal storage cannot be expanded. As far as the cameras are concerned, the Coolpad Cool 1 Dual packs a 13-megapixel primary camera on the rear and a 8-megapixel front shooter for selfies.

Coolpad Cool 1 Review here.

What is Root?

Rooting is the process of allowing users of smartphones, tablets and other devices running the Android mobile operating system to attain privileged control (known as root access) over various Android subsystems. As Android uses the Linux kernel, rooting an Android device gives similar access to administrative (superuser) permissions as on Linux or any other Unix-like operating system such as FreeBSD or OS X.

Why would you root?

One of the most obvious incentives to root your Android device is to rid yourself of the bloatware that’s impossible to uninstall. You’ll be able to set up wireless tethering, even if it has been disabled by default. Additional benefits include the ability to install special apps and flash custom ROMs, each of which can add extra features and streamline your phone or tablet’s performance. A lot of people are tempted by the ability to completely customize the look of their phones. You can also manually accept or deny app permissions.

Follow the Steps to Root LeEco Coolpad Cool 1 Dual. Before Rooting have a complete backup of you’re device

Tools Required

  1. QPST 2.7.437
  2. .Net above 4.0 should be Installed on the system.
  3. Qualcomm USB Driver
  4. Vcredist_x86

Download the Required Tools[sociallocker]Here. [/sociallocker]

Updated : Download the Recovery Folder here

Update: People facing Directory name not found Download this recovery

Step 1 : Make sure .Net Above 4.0 is Installed. .NET is a programming framework created by Microsoft that developers can use to create applications more easily.

To Install .Net Framework Above 4.0 Navigate to Control Panel –> Programs –> Turn Windows Features On or Off.

Check .NET Framework and hit ok. Wait till the .Net Framework Installs. If you can’t see .NET Framework Above 4.0 Click here to Download .Net 4.0. After the .Net Installation. Install the Tools Which is was Downloaded Before [sociallocker]downloaded before.[/sociallocker].

Step 2 : Extract the Downloaded files on the Desktop. There would be 2 Folders

  • Drivers
  • Setup

Navigate to the Setup Folder right click on setup.exe Application and select Run as Administrator.

The Installation of the required tools takes place click on next for all the following pop up windows. After the Installation of the Vcredist. QPST Tool will be installed. Click finish to complete the process of installing all the tools.

Now we are done with Installing Application. The next step would be installing the Qualcomm driver.

Step 3 : To install Install the Qualcomm Driver navigate to  the Drivers Folder. Qualcomm_USB_Driver_2.2.0.0_Setup. Right click on the exe file and Run as Administrator.

Click ok and next for the following windows and Install the driver.

Click on the Finish Button to Complete the Installation. Now make sure the Driver is Installed properly.

To check if the Driver is Successfully Installed. Check on the Device Manager. Hit windows+r and type devmgmt.msc to get the Device Manager and check if the Driver is installed successfully. The Driver must be installed in order to Root you’re phone.

Step 4:Important: Disable the Driver Signature Enforcement and Enable Test Mode

Open Command Prompt as Administrator and type the following.

Bcdedit.exe –set TESTSIGNING OFF

This allows non Signature and third party Drivers to Install on the Windows. Remember to Re-Enable Driver Signature Enforcement after the rooting process. Type the following to Re-Enable

Bcdedit.exe –set TESTSIGNING ON

Step 5 :Now we have installed all the necessary tools required to Root the Phone. Navigate to C: windows –> Program files (x86) –> Qualcomm–> QPST –>bin–>QFIL.exe.

Get the Developer Options and enable OEM Bootloader unlocking and Enable USB debugging on the Phone.

  • Turn of you’re Phone.
  • Plug you’re phone to the PC. Using USB cable.
  • Hold Volume up , Volume Down and Power Button At same time.
  • Hold this three buttons untill the Red notification light blinks atleast 3 times.

Release the Three buttons.Wait till the QFIL program Detects the Qualcomm COM Port.

Step 5 : Select Flat Build as the Build Type. Change the Build Type

Step 6: Click on Browse and Select Programmer Path to the Recovery Folder –> prog_emmc_firehose.mbn

Step 7: Click on Load XML and select RawProgram Path as rawprogram0.xml file located in Recovey Folder.

Step 8: Select Patch Path as patch0.xml. Both the files are located in Recovery Folder.

Step 9. Click on the Download Button and wait for the Success Message. Download button works only if the Qualcomm driver is detected by the Applciation.

Wait till you get the Message “Download Succeed. Finish Download” If you don’t success Message. Either Driver was not installed and configured properly or Driver Signature Enforcement is not turned off Follow Step Disable it.

Now we have successfully Flashed the TWRP Recovery. Unplug the phone from PC.

Hold Volume up + and the Power Button till the Phone Boots into Recovery Mode.

When the phone boots into Recovery Mode. Be careful.

Important First Click on the Language and select English as language. The default language is chinese.  and click ok to change the language and cancel to Return back to home.

You will see the Screen Keep System Read only Ignore the message and swipe Right to get Home.

Once you’re on Home. Select Advanced –> Tools –> Root Device.


Swipe right to Confirm to root the device and Install SuperSu.

After swiping to right it takes 2 minutes to install SuperSu. Don’t wipe the cache or Data.You might lost data. cannot unmount partition error would come. Ignore the Error Hit cancel and Click on reboot –> system. Once the device reboots you will find SuperSu installed on the device. and Root is Done.

Download rootchecker App from play store to check the process is successful. RootChecker will check if you’re device has been rooted successfully. Allow Permission for Rootchecker App to Grant Su Permission. and Click Verify Root on Root Checker.

Volia!! Now I’m sure you had Successfully Rooted you’re device.

I’ve rooted my phone. Now what?

Check out the Video

Missed any steps Finding trouble. Comment below or Contact us on here.

Disclaminer : ROOTING YOUR PHONE WILL PROBABLY VOID YOUR WARRANTY FROM BOTH THE CARRIER AND THE MANUFACTURER. IF YOU DO NOT WISH TO ACCEPT FAULT FOR ANY ADVERSE EFFECTS OF ROOTING, I’M NOT RESPONSIBLE FOR ANY DAMANGED CAUSED TO YOU’RE ROOTING YOU’RE DEVICE. PLEASE HAVE A BACKUP OF COMPLETE DUMP.

Credits: LeEco.re

Update: 1Those who get error download fail:Sahara fail:QSaharaServer Fail: The directory name is invalid. Please rename the file name prog_emmc_firehose.mbn to prog_emmc_firehose_652.mbn in the recovery folder and flash it in the same procedure. It will work.

UPDATE 2: Bricked you’re device? Follow this guide. https://www.pantomath.xyz//how-to-restore-or-recover-hard-bricked-soft-bricked-coolpad-cool-1-c103-c106-device/

Jay Kumar Ryan: I am Σ ideas but ∫ emotions.

View Comments (49)

  • I want to root Magisk instead, but I can't find the Zip. Help, I love Magisk more than SuperSU

    • Hi, Sorry for late reply
      First, Flash the custom recovery to you're device by following the guide, "Don't go to advanced option and select root" Instead replace the custom recovery with TWRP, Boot you're device normally install Magisk Manager to your phone. Download Magisk and flash it in recovery

      NOTE: ONLY MAGISK V14 WORKS PROPERLY WHILE ROOTING.

  • Rooting successful

    but for installing custom roms from twrp recovery the sdcard (internal storage from Install) shows 0mb data.

    please help i can't flash my phone and cant take backup also cant install new custom roms

    • It is showing 0mb because the file system is encrypted. The overcome this issue you have force yourself to decrypt to do that you need to wipe the data. When you have wiped the data the phone will start and boot but without encryption and when you mount it shows all the files.

  • Thumbs up for the guide [Officially supported by XDA], Only add the file size & after root twrp guide. If you want to (Since, the twrp is chinese port)

    • It's not russian, It's chinese. There is no ther way to root. Follow the guide root the phone and replace or flash it with TWRP.

  • Main pagal Hoga yer
    Mere pass Coolpad Cool1 Dual
    Koosbi Kohi nihi hora
    Please TWRP please Download please Full Video please Bhai

This website uses cookies.